Is there an easier way to tidy up your yard other than using a leaf blower that is powered by gas? The ideal blower will gather up all the leaves as well as any other little bits of debris in a short time and this will help keep your yard looking perfect 12 months of the year.
In order for you to get the perfect gas leaf blower, you must understand what things to look at before buying one. We will now go through them.
This website is supported by readers. As an Amazon Associate we earn from qualifying purchases.
The Buyer Guide
By making a smart choice when getting a leaf blower you can have them for years. Aside from collecting all your leaves and other debris, leaf blowers have many other services that they can offer.
On top of that, some multiple makes and models are available to you in today’s market and getting the one that is best suited to you can be a challenge. We will now look at some of the things that you need to think about when looking at buying a leaf blower.
Its Airflow Rate
This will decide exactly how much power the blower has and how you can use it. It is usually measured in Miles Per Hour or MPH and this will indicate the airspeed as well as the air volume. That is measured in Cubic Feet per minute or for short CFM and it also tells you how dense the air is.
If a blower has high CFM as well as MPH then the task can be a real challenge. On top of that, it also indicates that it has a big engine and has a high rate of consuming fuel. Ideally, you will pick the power rating that is suited to exactly what you will be using the blower for.
If you only have a small yard or patio then clearly you do not need huge amounts of power, one that has an airflow of around 300 CFM is ideal. On the other hand, if you happen to have a huge yard and other tough tasked then you should be looking at getting a blower that has an airflow rate between 300 CFM and 450 CFM.
If you are going to use it for even bigger jobs like moving snow and dirt during the peak winter months then you should be looking at getting a leaf blower that has an airflow rate of between 450 CFM and 700 CFM.
If you want to future proof yourself and also want to use it to get rid of some things like snow during the colder months while also being able to get rid of dirt and other debris a gas blower that has around 450 CFM to 700 CFM is ideal.
Be warned though, leaf blowers that are on the high side for power ratings will cost you more money, will use up gas quicker, and be a lot louder so just think about that before you jump in and buy one like that.
The Type of Engine
Normally today’s gas engines have two types of engines, a two-stroke as well as a four-stroke. A high percentage of gas blowers use two-stroke engines.
They tend to be better on fuel, however, there is a need to combine the fuel with oil. However with the four-stroke engines have more power and are simpler to use because unlike the two-stroke then is no need to mix the oil and the fuel, however, these machines usually cost a lot of money.
The Fuel Usage
This is a critical part of leaf blowers as you do not want to be constantly stopping to refill your blower all the time.
Many leaf blowers that are power by gas to in fact take unleaded fuel and that is good for you because unleaded is far cheaper than gas fuels. However, if you know the specific type of fuel you need, then that can cut your operating costs too.
Leaf blowers that are powered by gas do make more noise than electrical blowers. The loud noises generally come from the actual engine as well as from the airflow. If the engine has a higher rating of power and airflow then it will generally be louder.
Many companies try and limit the noise by using engines that are more efficient with their energy and generate low noise because of it. On top of that, companies can design a closed leaf blower to further help limit the noise. Because of their noise, you could be limited to certain parts of the day to use them as well.
Other Things To Consider?
You have chosen a gas-powered blower because you want to be able to get rid of all debris in your yard very quickly. Here are some other things to think about if you are going to purchase a gas blower.
As a rule, gas blowers give out more pollution than car engines. Engines that are two-stroke give out significantly higher pollution than cars and because of how loud they are, hearing loss is a real possibility so always wear hearing protection.
The products that we list as the top of the pile have specific gadgets to reduce carbon emissions. This is supposed to be able to let you breathe while you work without worrying about pollution. It is also good to remember that two-stroke engines without this technology will give out more emissions than other engines powered by gas like a four-stroke engine.
The Local Regulations
Some two-stroke engines have been rendered useless because of the impact they have on the environment. You should take the time to research with your local county or city and check to see if you can use it. It is even more critical you do this if you are a business owner as you will want to stick to the rules.
You should have hearing protection every time you use your gas blower. A two-stroke engine has a lower frequency of noise and that will still get through your ear protection however that still does not mean you have to wear them at all. It is more a fact of people being alert to damage to their hearing even though they wear protection.
These tend to be on the heavier side compared to models you can use with your hands. They have more power and are generally used for a longer timeframe. Ultimately it will depend on the size of the tasks you undertake as to whether you get a handheld or backpack blower.
The plus side for some backpack blowers is that they can double and suck up the debris as well as blow it away. This is a super handy thing to have and you will not need other bits of equipment to get the job done.
Frequently Asked Questions About Gas Leaf Blowers
What kind of gas does a leaf blower use?
Many gas blowers will use the same petrol that you use for the car, which is unleaded. You do not need to use gas however it might be more efficient if you do.
How to mix gas and oil for a leaf blower?
You should always check the blower’s instructions before you do anything. The general gas and oil ratio when mixing is 40:1. That means that it is one part of oil, 40 parts petrol.
Once you fill up at a petrol station, simply as the set amount of oil to petrol, then mix them and shake it too just to further mix them.
My gas blower will not start, why?
First, check your blower has gas to start with. If the gas tank is full however and it still does not start then your engine could very well be flooded. It will be noticeable if you can smell petrol. All you need to do is set both the throttle and choke to a fast setting and keep pulling the cord until you can get the engine to start. If this will not work then you might need to check the filter for the fuel or even the spark plugs.
Will it work with wet leaves?
This will largely be determined by how strong and powerful your blower is. If its CFM is high then it should be able to handle it. The biggest difference between gas and electric blowers is that electric ones do not have the power to move or get rid of the wet leaves.
Our Recommended Gas-Powered Leaf Blowers
Table could not be displayed.